Mud-club
Vehicle & Technical => Jeep => Topic started by: JEEPSTER on April 20, 2007, 13:40:35
-
did post this is another ongoing topic,but as it has not been resolved,i thought i would have a try at starting a new thread...
the car in question is a 2000 grand cherry (WJ series),it concerns the drivers seat,all function operate as they should apart from the rear rise/fall of the seat,the button works and the seat moves a very small amount and you can hear it "click",so power,switch and motor seems to be OK, but the seat will just not move :?
any tips/pointers will be much appreciated
-
It sounds like it's jammed somewhere or the motor is.
If you have the seat in the right position already I wouldn't worry about it.... could cost a fortune to fix, and for what ? How many times do you really need to move the seat from your normal driving position ?
On second thoughts, maybe you shouldn't answer that :wink:
-
It sounds like it's jammed somewhere or the motor is.
If you have the seat in the right position already I wouldn't worry about it.... could cost a fortune to fix, and for what ? How many times do you really need to move the seat from your normal driving position ?
On second thoughts, maybe you shouldn't answer that :wink:
sounds like that is what the problem is....
however,as i'm 6 foot,and m wife's 5 foot 3" the seat does need adjusting quite often,even with the 2 seat memory function,the seat wont budge :oops:
-
get a cushion :?:
:wink: :wink: :wink:
Sorry I can't think of owt else to do unless you dismantle the whole seat and manage to free off the mechanism