Mud-club
Vehicle & Technical => Defender => Topic started by: zacjake on July 06, 2005, 20:41:45
-
Hi
Having trouble removing one of my rear brake drums.What size is the bolt that you screw into the drum.Or any other helpful solutions:?:
Thanks Alan
-
its either M10 or M8 cant remember as i have a selection on my toolbox that i use till i find the correct 1,get the bolt started in the hole & as ur winding it in clout the drum with a hammer to jarr it so it will become loose,do this on the oposite side from the bolt,if it still wont shify wind the adjusters back till they reach there stops & reapeat the above method
-
I will try to remove my brake drums over the weekend.
Thanks Alan
-
i had a prob on my mates 90, wouldn't budge so we had to slege hammer the drum to smash it off
-
Have you wound the adjusters off?
If there is a worn drum, the lip will grab on the shoe
Just slacken off and pump the brake to centalise the shoes