Mud-club
Vehicle & Technical => Discovery => Topic started by: Skibum346 on May 20, 2007, 20:39:55
-
Right... fitted new headlights at the West Midlands Service day... didn't check they worked as they should... after all... just a couple of electrical plugs to unplug/replug...
Mistake!
Engine running...
Sidelights on - missing drivers side dim headlight
Headlights on - passenger side flickers to almost orange
Main beam on - headlights go to dim!
erm.... any suggestions...?!
Connectors have been checked and are firmly seated.
Skibum
-
First thing I'd try is connecting a second earth to the headlamp connectors, if that doesn't do anything try bypassing the dim-dip resistor on the bulkhead (turbo side) - looks like a small bronze/brass colour block.
-
you may think you have seated them properly ,but 300 lights have poo poo connections ,i have to really wiggle mine to get them to work right :? chrisw had to replace his connectors
-
Thanks lads... she's away till Thursday now so I'll check those ideas at the weekend...
-
Any Christmas tree effects are usually bad earths, but mine went a bit wobbly when I changed my headlight too, echo that about rubbish connections!