Mud-club

Vehicle & Technical => Suzuki => Topic started by: ant&vic on May 27, 2007, 16:44:01

Title: help!
Post by: ant&vic on May 27, 2007, 16:44:01
well been weston coyner today and noticed at the end i had starter problems, what can i do to stop this? also has anybody a spare alternator i can buy off them for a beer?

i remember seeing a few weeks ago on ebay someone selling easy start kits for the sj, cant find any now but do they actually work? cheers

oh and does anybody wanna help me fit a new clutch and cable as im useless ;)

thanks again and im in stoke on trent ;) :D
Title: help!
Post by: bigant on May 27, 2007, 19:19:21
*hides from ant*
Title: help!
Post by: glaggs on May 27, 2007, 19:35:44
Hi, you don't say what zuk you drive? but I have a Vit alternator going cheep. Try taking the starter motor off and the strip it down, my Jimny one was full of mud and crap!
Title: help!
Post by: muddydisco on May 27, 2007, 21:04:39
When were you thinking of doing the clutch. Have you got the tools etc

        Cheers Aaron
Title: help!
Post by: ant&vic on May 27, 2007, 21:16:20
hi depending on cost i can do it whenever i gotthe normal tools which is probally everything i need like spanners sockets etc... will i need any special tools?,

ANT il be down in the week so you can fit my lift kit ;) *big cheesy grin*

oh and its an sj410 ;)
Title: help!
Post by: muddydisco on May 27, 2007, 21:25:36
Quote from: "ant&vic"
hi depending on cost i can do it whenever i gotthe normal tools which is probally everything i need like spanners sockets etc... will i need any special tools?,

ANT il be down in the week so you can fit my lift kit ;) *big cheesy grin*

oh and its an sj410 ;)


Just pm me when your thinking of doing it and i,ll let you know.  What kind of lift are you doing shackles or axle under springs
Title: help!
Post by: ant&vic on May 28, 2007, 07:57:28
[/quote]Just pm me when your thinking of doing it and i,ll let you know.  What kind of lift are you doing shackles or axle under springs[/quote]

cheers dude will do :lol:
Title: help!
Post by: Mighty_zuke on May 28, 2007, 10:07:31
You will need a clutch allignment tool. I tried without it and after lifting the gearboxes in and out 4 times me and a mate  gave up :x . Tool was under a tenner from E-bay! Fitted perfectly first time and I was on my own! :D
SimplePortal 2.3.5 © 2008-2012, SimplePortal