Mud-club

Vehicle & Technical => Range Rover => Topic started by: disco maniac on January 11, 2008, 16:19:17

Title: 200tdi into classic rr
Post by: disco maniac on January 11, 2008, 16:19:17
would anyone if a 200tdi engine from a disco would go straight into a 1992 petrol range rover, and if it will are any pitfalls

thanks
Title: Re: 200tdi into classic rr
Post by: ChrisV8 on January 11, 2008, 16:57:17
It goes straight in but you need the gearbox as well to make it easy, LR did a conversion kit of all the bits, engine, gearbox, radiator and intercooler when the tdi first came out. My daughter has one (didirangerover on here)which was converted, has been excellent with really good fuel consumption around 30 - 35 even better on veg oil as well !!

Only weldy bit is putting the engine mounts on the chassis but not that difficult. best bet is to get a rusty Disco and transplant the lot
Title: Re: 200tdi into classic rr
Post by: Bobtail on January 11, 2008, 19:47:57
Hi Chris

If you want to have a look at mine (Was 1988 3.5 auto )

now fitted with 91 disco 200 tdi engine and box

your very welcome

I'm only in Brackley

Jim
Title: Re: 200tdi into classic rr
Post by: disco maniac on January 11, 2008, 23:31:30
thanks for that, i'm just dismantaling a 'rusty old disco', so i'll keep the engine and box ready to transplant.

and if its okay jim, i wouldn't mind a look at yours sometime.

gary
Title: Re: 200tdi into classic rr
Post by: Range Rover Blues on January 12, 2008, 03:41:01
I've a mate who has on as well, though I'm pretty sure it went into a Turbo Deisel car.

There are some differences but if you have the car then it'll get there in the end ;)

Things like the fuel pump are different IIRC and the clutch pipe.  The rad will go in place of the V8 one though, I can't remember if the engines mounts are the same on the 200 but I know the 300 TDi had different ones to the V8.

For some reason I remeber my spar propshaft wouldn't fit a 300TDi either :?
Title: Re: 200tdi into classic rr
Post by: Bobtail on January 12, 2008, 12:55:39
thanks for that, i'm just dismantaling a 'rusty old disco', so i'll keep the engine and box ready to transplant.

and if its okay jim, i wouldn't mind a look at yours sometime.

gary


PM For you Gary
SimplePortal 2.3.5 © 2008-2012, SimplePortal