Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: Artwigwa on November 18, 2009, 18:00:02

Title: Diff ratio marking question
Post by: Artwigwa on November 18, 2009, 18:00:02

Hi all,

Where do I find the Diff Ratio Markings  :-. 

I need to fit one to the front but have three to chose from  :-k  I'm assuming the rear on my SWB S3 is 1.4:7

Regards

Title: Re: Diff ratio marking question
Post by: bogie on November 18, 2009, 20:24:56

Count the teeth mate!

Title: Re: Diff ratio marking question
Post by: tack43 on November 18, 2009, 21:55:32

Mark the gear, them mark and rotate the pinion. It should turn about 4 3/4 times for a 4.7:1 (series) diff or about 3 1/2 for a 3.54:1 (90/110, RRC, Disco) diff.

Hope this helps

Rich

Title: Re: Diff ratio marking question
Post by: Artwigwa on November 24, 2009, 19:46:32

 :dance: Thanks for the tips, will have a look/count to find the correct diff!  :D