Mud-club
Vehicle & Technical => Military => Topic started by: landroverkeith on October 12, 2008, 19:37:44
-
Are the Body Fixings for a sankey easy to source and get hold of?
Weve taken the body of the chassis of my sankey for repair and just about each bolt has snapped
many thanks keith
-
If we are talking about nuts and bolts, you can replace them with newer metric ones, with matching washers, or are the bolts screwed into captive nuts
-
If you're on about the little 'J' hooks - just heat up some suitable bolts and bend them to suit, then saw the heads off them - its how we do it at work when they take for ever to come through the system.........
-
If you're on about the little 'J' hooks - just heat up some suitable bolts and bend them to suit, then saw the heads off them - its how we do it at work when they take for ever to come through the system.........
Nothing changes then, never get what you want when and where :lol:
-
If you're on about the little 'J' hooks - just heat up some suitable bolts and bend them to suit, then saw the heads off them - its how we do it at work when they take for ever to come through the system.........
ta
-
[
Nothing changes then, never get what you want when and where :lol:
Yip, same old, same old..............
-
Bending a thread will undoubtedly weaken it though, I often find they split from between the threads.
-
Agreed - hence my use of the word 'bolts' - the bend is at the 'shank' end - hence removing the head, and by suitable I meant long enough shank to incorperate the bend.........
Thanks RRB for forcing that extra information out of me! :lol: