Mud-club
Vehicle & Technical => Defender => Topic started by: bombx3 on August 17, 2007, 21:09:45
-
i have fluid leaking out off the cap lid but it is nice and tight and there is a o ring in .It it possible it is presurizing and blowing out.If so why
Regards
Ray
-
is it the new plastic type? or the series/NA typre cus the old ones leak like mad and will always leak.
-
Its plastic 200 tdi
-
Must be pressurising then, ive never known one leak, is it cross threaded on the cap? is the thread in good condition? what about the level of fluid, not too much in there? The only other thing is that its sucking air in somewhere
-
Must be pressurising then, ive never known one leak, is it cross threaded on the cap? is the thread in good condition? what about the level of fluid, not too much in there? The only other thing is that its sucking air in somewhere
Thead all good ,fluid levels ok,where can it suck in air to
-
ive never known one to leak :?
have you over filled it
has the o ring been pinched ?
dan
-
just tried new cap of mates 90 and still blowing when run for a while
-
is it all bubbly inside when running without the cap on ?
-
yes