Mud-club
Vehicle & Technical => Discovery => Topic started by: Zippo68 on August 27, 2009, 17:58:54
-
Hi got a 94 Disco (3.9V8) with LPG. Started overheating couple of weks ago, AA bought me home said it was head gasket.
Does anybody know how much it costs to get one of these replaced and where in Birmingham I can get it done.
Thanks
-
Head gasket £20 ish,a skim £20 ish but u must have both heads skimmed thats if they need doing. And a few days of fidderly pain up the ass work!
-
Try solihull-mick on here, he's very good,
MRM Services, Solihull, Landrover Specialists,
Unit W3 James Rd, Tyseley, B11 2BA
Mud-Club Discounts
0121 708 0602 07816 303 541
www.mrmservices.org.uk
-
You need to make sure its the head gasket first as the 3.9's suffered from slipped liners. If its a slipped liner then its terminal for the engine.
Get a test done on it to determine wants gone on it.
-
It's more likely that overheating caused a slipped liner than vica-versa. Head gaskets do go, especially after something like a mild overheat caused by low water level. The V8 can leak anywhere form the many hoses but a common one is the end of the smaller pipes near the throttle body, right where you can't reach it.
Anyhoo, a full set of gaskets will be about £40 and I can get mine skimmed for £20 each. If you skim the heads you raise the compression ratio. The comnposite gaskets compress down to 1.2mm, the aluminium (tin) gaskets are 0.5mm and there is a dimension given in the manual for how much metal you can atke off.
you have no real garantee that they havn't been skimmed before, but if you know where to look you can make a sound guess.