Mud-club

Vehicle & Technical => Defender => Topic started by: sighnbox on September 11, 2010, 20:56:13

Title: 110 county NA fitted with a 200TDI (defender) Which uprated Intercooler
Post by: sighnbox on September 11, 2010, 20:56:13

Hi I have a 110 county was N/A now with a Defender 200TDI will any of the uprated full size intercoolers fit dose any one know without to much mod going on ??????

Title: Re: 110 county NA fitted with a 200TDI (defender) Which uprated Intercooler
Post by: Range Rover Blues on September 17, 2010, 20:36:58

I'm not an expert but you can make room by fitting an air conn grille.

Title: Re: 110 county NA fitted with a 200TDI (defender) Which uprated Intercooler
Post by: MuddyDiscoveryJay on September 17, 2010, 21:06:59

My 90 has a massive full width intercooler with a 200Tdi, would you like me to remove my grille and take some pics for you?

Jay

Title: Re: 110 county NA fitted with a 200TDI (defender) Which uprated Intercooler
Post by: Saffy on September 17, 2010, 22:17:23

you tend to have to lose the bonnet catch and the two slam panel support rods/bars, and make/fit two supporting brackets for the top or sides of the full length intercooler, and move the horn location as far as mods go. Best to replace with silicone hoses as the inlet and outlet may no longer quite be in standard position and the longer length and flexibility of silicone will make things easier. Using an aircon front panel doesn't improve fitting really - does allow front fitting of electric fans though.

Title: Re: 110 county NA fitted with a 200TDI (defender) Which uprated Intercooler
Post by: sighnbox on September 22, 2010, 15:02:51

Thanks for your help managed to find the solution thanks ..Yes you remove the slam plate bars and when fit the intercooler you get brackets (allisport one) that fit to the intercooler and  to the slam plate to hold it...Only other thing I think you have to grind down the bonnet catch to stop it striking the top of the intercooler. Thanks peeps.