Mud-club
Vehicle & Technical => Defender => Topic started by: 90sam on April 09, 2007, 10:41:22
-
Hey,
Tried to start my 90 for the first time in about 2 weeks, and it turns over but doesnt actually start, i can hear alot of clicking as it turns over, but it never gets any further. any ideas? Im hoping to go offroading this friday
Kind regards
Sam
-
Clicking as in the starter solenoid clicking in and out? If the starter relay is clicking, it's probably because when the starter turns over, the battery voltage drops to the level where the solenoid kicks out... then when the load is taken away the solenoid kicks back in and the starter turns over... repeat ad nauseum.
If this is the case then a jump start should sort you.
-
Thankgod! Shall try it later. Will this have anything to do with me putting a radio in? :lol:
-
Depends how you wired it! If it's on the permanently-on feed rather than the switched feed, it could be putting a constant drain on the battery, and if the battery's a bit of a duffer, over a couple of weeks you'll lose power.
-
Its only on when the ignition is on so i think im okay!
-
does it start now then?
-
Yer does, thankyou all :lol: