Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: dan on March 03, 2004, 20:31:20
-
would a Land Rover Defender 2.5 litre normally aspirated diesel engine and Gearbox fit in to a s111 if so what do i need to do?
Thanks
Dan
-
I've just sold my S3 which had that set-up, it was already in when I bought it so not sure what you would need to do, but yes you can definitely do it.
I'm sure somebody will be along shortly with a few pointers! :wink:
-
The engine, yes relatively straight forward as far as I know.
The gearbox is less straightforward as it would then have permanent 4wd which means you should change the front axle for one with CV joints (stage 1 V8 is the only leaf axle with CVs). Relative length of the gearbox may also cause problems with propshaft length.
Then again anything is possible with an oxy-acetylene torch and a big enough hammer :twisted: :twisted:
-
ISTR that the 2.5, in simple terms, is just a 2.25 bored out to 2.5 with a bit of modernisation isnt it?
Would it be easier/better to bolt the 2.5 to the exising S3 gearbox or is the box stuffed?
Stage 1 V8 bits like front axles are like the proverbial rocking horse doo-doo arent they? :?
-
ISTR that the 2.5, in simple terms, is just a 2.25 bored out to 2.5 with a bit of modernisation isnt it?
I thought the difference was in the stroke.
Would it be easier/better to bolt the 2.5 to the exising S3 gearbox or is the box stuffed?
Certainly easier. The 2.5 petrol went in my S2 without any problem.
Stage 1 V8 bits like front axles are like the proverbial rocking horse doo-doo arent they? :?
The stage 1 specific parts are AFAIK
-
Dan, how are you getting on with the conversion ?
If you're interested, I'm breaking my 90 in a few weeks so I've got a 2.5 NAD up for grabs along with all the gubbins, gearbox, transfer box, axle etc etc
-
the 2.5 will go stright in but you might as well put a s2 or s3 box on it lesst messin around and if your up toit put some rang rover 3.5 diffs in there that will sort you out only if you put a 2.5 turbo intercooled jobby in ther ull have to do minor engine mount mods as ive have done both mods to a s3