Mud-club

Vehicle & Technical => Jeep => Topic started by: henryandlesley on May 14, 2007, 15:17:50

Title: rear wheel bearings
Post by: henryandlesley on May 14, 2007, 15:17:50

how hard are they to do  on a 2.5 petrol cherokee jeep

Title: rear wheel bearings
Post by: v8bubba on May 15, 2007, 00:56:53

easy but are you sure they are shaged as they have in and out float 2 to 3 mill anyway from the way they are retained as long as there is no lift in them they are fine they make a nice clunk if you slide them in and out

Title: rear wheel bearings
Post by: daggie on May 16, 2007, 19:01:37

No it won't spin, it has a limited slip diff in it 8)
end float is usual.
check the ujs on the prop