Mud-club
Vehicle & Technical => Discovery => Topic started by: Ralph Hardwick on July 17, 2007, 17:10:08
-
Hi all
Does anyone know where I can get hold of something like the rear recovery points fitted to Camel Trophy discos.
It fits behind the existing bumper, which has to be cut and provides a point for a pin recovery point?
Any help would be apreciated.
Cheers
-
Guess not then :(
-
On the Camels it was a purpose made fabrication welded to the rear cross-member to take, from memory, a Dixon Bate pin hitch.
If you speak to Mark at Discoparts, he'll sell you a mounting plate for his HD bumper which is very similar in design, except it bolts on. He'll make you one without the square hole too. You can then drill this to suit whatever hitch you'd like to fit and trim your existing bumper around it.
(http://homepage.ntlworld.com/stage1v8/Resources/RearBumperBracket.JPG)
-
Darren
Thanks very much for the info I will give him a call.
By the way excellent website, I have gain several tips from it. Cheers :D
Ralph