Mud-club
Vehicle & Technical => Discovery => Topic started by: mattyme on July 14, 2011, 18:45:14
-
hi all, my rear windows on my truck are very temperamental.... theyve started to not work initially occasionally, but, now most of the time.
ive called landrover to see if there is a control module for the rear windows but they said the control modules are for left and right.
i cant see any wiring issues, tho i havent had the carpets up to trace wiring yet.
any suggestions at all folks?
cheers!
-
Hiya, chances are it will be the dry soldered joints on the control board which is mounted behind the glovebox. Do a search for this on google and there is a very good diagram showing you how to fix the fault. Or do like i'm going to do this time and fit manual window winders.
-
dry solder joint is an easy fix.
-
lovely, cheers fellas.
found the pic on google, ill be doin the job tomorrow!
-
just to update my window dilema.....
all fixed as good as new!! lol
i followed the instructions on google and pulled the circuit board out of its case, found the dry solder and resoldered it.
a good 20 minute fix!!
it was even the exact solder joint that was highlighted on the google picture i used!!
thanks folks!
-
they all seem to go in the same place from experience. Well I know mine did anyway lol. Fixed mine over 3 years ago now and touch wood they are still working.
Mark
-
mine are the same. I sometimes find if I turn the ign on with the rear windows pressed they work..... job for lunch I think.
-
will be trying this myself my rear windows not worked for ages :azn: :azn:
-
Any chance of a linky? I've heard of this before and now I find it's my turn to have a go.
A 20 minute fix, that'll make a change.
-
http://www.landyworld.co.uk/discowindows.htm (http://www.landyworld.co.uk/discowindows.htm)
-
mine were the same... dead easy fix.
the pic on google shows exactly the joint that fails!!
-
http://www.landyworld.co.uk/discowindows.htm (http://www.landyworld.co.uk/discowindows.htm)
Thanks :laugh: