Mud-club
Vehicle & Technical => Defender => Topic started by: zulublue on February 08, 2009, 23:53:55
-
My gearbox decided not to engage reverse, I guessed it was the reverse plunger sticking and once I had removed it is looks like the bearing has worn down so it sits below half way on the plunger and thus it jams, I can find the parts for the plunger casing and plunger shaft, but can you get the bearing on its own? if not does anyone know what size bearing it is in there? Also looks like the circlip has gone any ideas on this.
I have done a temporary fix for now binding some thin wire around the drop in on the plunger so it lifts the bearing about 1mm.
It might be a case of getting a complete new unit.