Mud-club

Vehicle & Technical => Range Rover => Topic started by: gingernutsv8 on April 28, 2010, 22:32:50

Title: 300tdi soft dash
Post by: gingernutsv8 on April 28, 2010, 22:32:50

i've put a 300tdi into a soft dash and it now ticks over rough it was perfect in the disco it came out of has anybody got any idea's

Title: Re: 300tdi soft dash
Post by: madhouse6 on April 28, 2010, 22:49:25

Put a clear pipe in the fuel line from the lift pump to the high pressure pump & see if it dragging air,

Title: Re: 300tdi soft dash
Post by: Range Rover Blues on May 03, 2010, 03:08:47

That's the correct engine for that car, is it a V8 replacement or just a new(er) engine?  either way I think it's something you've done connecting it up.

The old favourite, drop a pipe from the lift pump into a jerry can.

Title: Re: 300tdi soft dash
Post by: gingernutsv8 on May 03, 2010, 15:22:54

It's a v8 replacement no air in system

Title: Re: 300tdi soft dash
Post by: Range Rover Blues on May 04, 2010, 00:35:49

Did you replace the tank or get rid of the fuel pump in the tank?  what about the in-line petrol filter?

Title: Re: 300tdi soft dash
Post by: gingernutsv8 on May 04, 2010, 19:36:01

changed pump in tank and got rid of filter

Title: Re: 300tdi soft dash
Post by: J.D. on May 05, 2010, 13:14:54

Check the sender unit, the pipes on the sender unit which come out the tankl have a habit of getting minute holes in them.