Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: Bigant45 on March 24, 2010, 16:13:00
-
Hi, I have fitted a complete second hand Brake Servo Ass'y and Master from a S3 to my S2a. Two servo's later. I have No Servo assistants. The one way valve works and also the pump.
Is it time too buy new. I am just concerned that it may turn out the same.
Cheers.
-
Hi,ive had this problem many time and to be honest ,get a new servo for £46 and while your at it replace the master with one from a long wheel base(converting to single line) as it has a 1 inch bore in stead of 3/4 giving better brakes and only costs £20 instead of £56 for dual,you will then have good brakes for years.
-
Do you have vacuum at the pipe leading into the servo?
Mike
-
Yes i have good vacuum. Forgot to say, Ive just recently fitted 200tdi "sweet"
-
Then you must have been unlucky with two bad servos, or you have fitted them wrongly!
Mike
-
You cant really do anything wrong with a fitting a servo apart from having a faulty one.Just bite the bullet n go for a new one.