Mud-club

Vehicle & Technical => Not Anything Listed Above.... => Topic started by: pommy on March 16, 2009, 21:02:21

Title: Waterproofing
Post by: pommy on March 16, 2009, 21:02:21

Hi all what`s the best way to waterproof the electric`s on a lada ?
just the stuff to keep it running thanks

Title: Re: Waterproofing
Post by: McGuire on March 18, 2009, 18:43:30

 Concentrate on the distributer - that's what causes most problems on the carb models. Usual thing of sealing the base of the cap, taping the breather hole (remove when not required), and a spray of WD40, or similar, on the leads.
 If you've got the 1.7 injection model, it's a case of spraying the leads and coil pack. Even better would be to move the coil pack to a higher location. The leads are long enough to permit this.
  On both 1.6 and 1.7, it's possible to move the alternator from the bottom, right of the engine, to the top, left, provided you don't still have the spare wheel under the bonnet. If you look on either difflock, or www.lada.co.uk , you'll find a chap called excossack. On his site he has plans and a photo installation of the Hoodoo alternator bracket, that does just this.
 

Title: Re: Waterproofing
Post by: pommy on March 23, 2009, 00:30:21

Thanks for that