Mud-club

Vehicle & Technical => Toyota => Topic started by: JimAlex on February 13, 2007, 17:07:15

Title: HiLux injector pump
Post by: JimAlex on February 13, 2007, 17:07:15

:?: I have a leaking injector pump (1989 2.4) and am trying to remove it but have discovered that the drive gear is on the shaft with a taper and woodruff key. Is it possible to break this taper without stripping the front of the engine? There is a round access hole in the cover.

Title: HiLux injector pump
Post by: JimAlex on February 13, 2007, 21:39:29

:D Solved it - but I will now need a timing diagram to put it back together!

Title: HiLux injector pump
Post by: Ja1983 on March 13, 2007, 17:48:21

D`oh!

dismantle everything then yes?

may aswell replace belts etc as your there  :wink:

Title: HiLux injector pump
Post by: plumb bob on June 14, 2007, 07:14:23

Did you get the leak fixed, I have the same problem with my '89 2.4 2LT.

Been looking for a replacement pump, but they are like hens teeth.

Did you use a seal kit, and if so where did you get it, and is it an easy job?

Let me know how it goes.

Title: HiLux injector pump
Post by: Woodzie on June 14, 2007, 07:46:14

Quote from: "plumb bob"

Did you get the leak fixed, I have the same problem with my '89 2.4 2LT.

Been looking for a replacement pump, but they are like hens teeth.

Did you use a seal kit, and if so where did you get it, and is it an easy job?

Let me know how it goes.

Give tony a shout.......... http://www.4x4toys.co.uk/

Title: HiLux injector pump
Post by: andyw on June 14, 2007, 22:41:15

Is this any help to you.

http://www.toyotasurf.asn.au/techsite/timingbelt.htm

Title: HiLux injector pump
Post by: plumb bob on July 15, 2007, 11:23:46

Did he ever fix it then????