Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: bradshaw on June 16, 2005, 13:27:30
-
Does anybody know if its is possible to fit power stearing from a 90 into a series 3 lightweight without butchering the chasis to much?
-
to do it properly you need to move the whole front crossmember and fit a 90 steering column. not that easy a job to do
-
Here is an article I wrote many moons ago when I did it to my Series..
http://members.mud-club.com/library/index.php?articleid=16
If you can forgive the endless mistakes and omissions... it might help.
-
See John, I told you it wouldn't be an easy job!