Mud-club

Vehicle & Technical => Range Rover => Topic started by: colintandy on January 12, 2008, 09:46:39

Title: on board air system
Post by: colintandy on January 12, 2008, 09:46:39

gday :lol:

has anyone managed to convert there aircon pump to be able to run on board air system instead of air-con
if so do you have any pics diagrams or explane how and what is needed to do the job
cheers all from sunny new zealand..colin

Title: Re: on board air system
Post by: wizard on January 12, 2008, 12:08:49

Hi Colin

do a search on here as its been covered a few times.
www.onboardair.com (http://www.onboardair.com) will give you a lot of good ideas as well
I think there are a few pix in my gallery


With the York compressor (http://members.mud-club.com/galleryimages/43173155d5cf18dbe2dd9a5cb7ad4b8a.jpg)


with the sanden compressor (http://members.mud-club.com/galleryimages/432f56e435e3e6536bb84f2c7943ace2.jpg)


Regards
wizard :twisted:

Title: Re: on board air system
Post by: Range Rover Blues on January 12, 2008, 15:22:05

AFAIK you need to add oil to the 'normal' type (not the York) to lubricate it, the filter the oil back out again for your air inflater, though I guess it wouldn't hurt any air tools.

Most of the stuff youneed is available someway or other, you can get in-line oilers and oil traps.