Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: Ser3 J on March 29, 2007, 17:56:36
-
I have a 2.25 petrol (5MB) which currently has a webber carb (type unknown) fitted. I want to fit the original Zenith 36IV to put the LR back to 'normal' and complement the Turner uprated cylinder head I am going to order.
I cannot seem to find anywhere that stocks original (Not dubious copy) Zenith Carbs - Am I being a bit daft? :oops:
Also - any suggestions ona less restrictive manifold/exhaust?
:)
-
You need to go to a proper carb retailer. This (http://www.burlen.co.uk/) place sells them.
-
The exhauast has a few options.
A Stainless Sports system.
Or an ACR tubular manifold and Hi flow silencer.
-
Thanks guys :P
-
I have a zenith carb in the garage i took off my series 2a to replace with a weber.
COuld do with stripping down and a good clean, some beer tokens and its yours.
-
Minimad,
Thanks for the offer - Iv also got an old one amoungst my bits and bobs - but Iv gone and ordered a shiny new bit!! Saves my bungled 'refurb' efforts and should give plenty years of service.
:wink:
Still working on an exhaust tho...
-
I want to fit the original Zenith 36IV to put the LR back to 'normal' and complement the Turner uprated cylinder head I am going to order
I do not believe the zenith would complement an uprated (stage 1 or 2) head.
I would advice talking to ACR regarding the head. they also do the downpipe and exhaust (back box) to suit an uprated head (as well as the head).
If you have a bit of left over cash from that i would suggest getting the SU HS6 carb from them. All these combined are worth every penny, just getting 1 part is not such a benefit.
-
:D
Iv just noticed ACR - Im considering that option as well - although if im very lucky - I may be changing engine :twisted:
And it wont need a carb...