Mud-club

Vehicle & Technical => Discovery => Topic started by: kpautos on April 09, 2012, 08:29:37

Title: Tyres
Post by: kpautos on April 09, 2012, 08:29:37

Whats the tallest rubber you can ft on a 95 landy without a lift kit but if your prepared to chop body at rear ect? Thanks, kirk.

Title: Re: Tyres
Post by: Thrasher on April 09, 2012, 12:45:11

235/85 - with cuts.

Title: Re: Tyres
Post by: kpautos on April 09, 2012, 23:01:08

Cheers

Title: Re: Tyres
Post by: John td5 on April 09, 2012, 23:46:19

I've had  D1 i had with 235/85/16mts with no mods a D2 2003 with 265/75/16mts with no mods and a Defender 07puma 305/75/16mts with 1 inch wheel spacers.

Title: Re: Tyres
Post by: Saffy on April 10, 2012, 20:34:33

depends how tired the suspension is for the 235/85 thang. even on the same height skinnies (7.50's) mine needed a trim front and rear whereas my neighbours didn't. Both on disco steels.

Title: Re: Tyres
Post by: kpautos on April 12, 2012, 21:17:56

Customer has decided with my persuasion! To have a 2inch lift, springs, ect so new sizes required now!

Title: Re: Tyres
Post by: mattyme on April 15, 2012, 20:36:58

with a 2" lift, 265/75/16s are a good fit with only a camel cut on the rear arches needed, 1" spacers help to keep the steering lock to lock
ive got 285/75/16s on with 2" lift, arch extensions and spacers. gonna lift the fron end another 2" with spribng spacer seats tho i think cos the tyres are a bit too close to the arches with the winch and winch bumper on.