Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: datalas on January 02, 2004, 08:29:46
-
The next few weeks should see Petro reborn with a new (hopefully running properly) engine, so the question is this, asside from the engine (obviously) what parts are required to do the job properly....
Clutch Plate
Engine Mounts & Bolts
Oil
Plugs
Points
Sump Gasket
Oil Filter
A Stockpile of Teabags (to be used as a Tim pacification tool)
Clutch Fluid
Antifreeze
Anyone got anything else?
The gearbox is intended on staying where it is, since it's going to be a begger to get out, also swapping out the radiator bulkhead, but already have a new radiator fitted with new hoses & clips etc..
-
Masking tape and a marker pen? That way you can tape up any cables/pipes disconnected and a note of where/what they are.
A cardboard box - to put all the little bits left over in!