Mud-club
Vehicle & Technical => Defender => Topic started by: fatphunker on April 25, 2008, 18:31:05
-
has eney one broke the bolt that holds the speedo to the gearbox and is there a way to fixing it with out drilling it out ?
CHEERS!
-
If you've got access to a MIG welder, carefully weld a nut to the end of the broken bolt/stud through the hole in the nut (this will work even if it's sheared off flush with the surface). The heat should help to break the bond with the gearbox casing & you can then get a socket on the nut to undo it.
I've used this tried & tested method successfully many times.
-
thanks i will give it a try DOH!!