Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: Disco_Dennis on June 10, 2009, 13:15:37

Title: Series 2.25 starter motor - diesel/petrol
Post by: Disco_Dennis on June 10, 2009, 13:15:37

Hi all. 

Can anyone tell me if the starter motor from a diesel 2.25 can be used on a petrol 2.25?  :?

The one I have on the petrol is on its way out,  :'(  but I have a 2.25 diesel engine here (knackered!) with a good starter motor.  :)

I know the petrol has an inertia starter and the diesel is a pre-engaged type - but are they transferable?  :huh:

I'm pretty sure they are the same flywheel  [-o< - and therefore they should be interchangable?  :-k

I could just bolt it on - but I don't want to go and screw up my flywheel if it's wrong!  :doh:

Anyway - does anyone know for sure?   :huh:

Cheers...
Den.

Title: Re: Series 2.25 starter motor - diesel/petrol
Post by: bogie on June 11, 2009, 20:38:34

2.25 p and d 2.5 p and d  and 200 and 300 are all the same,just the solanoid is mounted on tdis and they are stronger motors.

Title: Re: Series 2.25 starter motor - diesel/petrol
Post by: Disco_Dennis on June 15, 2009, 14:07:32

So a starter from any 2.25 or 2.5 will work fine, then?

Thanks for the info.

Den.

 :dance: :dance: :dance: :dance:

 :grin: :grin: :grin: :grin:

Title: Re: Series 2.25 starter motor - diesel/petrol
Post by: bogie on June 15, 2009, 16:46:14

they will all work on 2.25 and 2.5 .