Mud-club

Vehicle & Technical => Mitsubishi => Topic started by: jamesey on May 07, 2007, 06:48:40

Title: advise on changing the gearbox oil please (auto)
Post by: jamesey on May 07, 2007, 06:48:40

hi , im doing the auto gearbox oil and would like to know on the best way to do this and the correct oil
my mate says the engine needs to be running to do it and in park is this true???????   how much does it take   i intend to drain it and fill with fresh
is there and filters on it

Title: advise on changing the gearbox oil please (auto)
Post by: GORDY 1 on May 07, 2007, 13:03:00

Hi you don't need the engine running but the oil need to be warmed up first so drive it for a few miles it will take around 5.1L of Dexron or any ATF you refill it through the dipstick tube takes a while but its an easy job and well worth doing.

Title: advise on changing the gearbox oil please (auto)
Post by: jamesey on May 07, 2007, 15:43:07

so theres no filters , and really fill it through the dip stick r u sure??? :?:

Title: advise on changing the gearbox oil please (auto)
Post by: GORDY 1 on May 07, 2007, 16:45:09

I am that's what it says in the workshop manual and thats what i did

Title: advise on changing the gearbox oil please (auto)
Post by: jamesey on May 08, 2007, 19:41:45

no filters then

Title: advise on changing the gearbox oil please (auto)
Post by: Spud on May 09, 2007, 12:00:46

Measure what you drain out as not all the ATF comes out.

You may be lucky to get only 2.5 litres out of the gearbox......

All the best

Spud 8)

Title: advise on changing the gearbox oil please (auto)
Post by: GORDY 1 on May 09, 2007, 17:34:06

Most models with drain plugs do not have a filter

Title: advise on changing the gearbox oil please (auto)
Post by: markyd on May 10, 2007, 15:28:51

There is a filter inside the auto box( metal mesh type). unless its giving you serious grief leave alone. replace with dextron 2 fluid. you will notice the difference on gear changes and how smooth it is. :wink:

When refilling with new fluid start her up and keep stationary select gears right the through the range a few times, this will ensure the box is filling up acurately when you check on the dip stick.

Title: advise on changing the gearbox oil please (auto)
Post by: Mutz on May 25, 2007, 17:33:39

As Markyd said metal filter inside pan, bit of a job to get to but i had mine cleaned when i first got it as you just dont know what "crud" could be blocking it. Just for peace of mind really.

Title: advise on changing the gearbox oil please (auto)
Post by: missroadrage on June 04, 2007, 20:42:35

Quote from: "Spud"

Measure what you drain out as not all the ATF comes out.

You may be lucky to get only 2.5 litres out of the gearbox......

All the best

Spud 8)

This is very good advice we did my auto box oil change & put 4.0 litres in before running it for a while & going through box whilst stationary & checking it - we kept having to take some out. The torque converter doesn't drain so check it regularly as you put it in - it will save a lot of time & ATF up your sleeve  :lol:  :lol:  :lol: