Mud-club
Vehicle & Technical => Range Rover => Topic started by: generation-x on October 05, 2010, 16:25:05
-
hi guys lookin more for info and pix . Does anyone have these fitted? How do they bolt the original shock mount to the drop plates? I'm more than slightly confuzzled about how they mount. Simon
-
There are more than 1 type :?
Mine are the 10mm plate type. They bolt to the chassis through the original holes and the shock mount bolts to them
-
There are more than 1 type :?
Mine are the 10mm plate type. They bolt to the chassis through the original holes and the shock mount bolts to them
many thanx for the pic m8y
do the hangers top mounts still go thru the chassis? and the bottm just throu the drop plate?
Simon
-
no. top mount bolts are fixed to plate and bottom bolts through... hang on, pics easier :-k
Black bolt heads are the original bolts through the chassis, the third is replaced by the csk allen bolt in the centre
-
I have a diffrent type to the one shown, Mine you unbolt the old mount (3 bolts) and bolt on the new, which has the mounting welded on at what ever the decrease is i.e. minus 2 or 3 inch.
I have some that I don't need, I can bring them along on the 13th if you want?
Jonny
-
jonny
your a star but cud i collect one eve next week as i have an event in couple of weeks
how much you looking for them?
si