Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: Bigant45 on March 24, 2010, 16:13:00

Title: Series Brake Servo.
Post by: Bigant45 on March 24, 2010, 16:13:00

Hi, I have fitted a complete second hand Brake Servo Ass'y and Master from a S3 to my S2a. Two servo's later. I have No Servo assistants. The one way valve works and also the pump.
Is it time too buy new. I am just concerned that it may turn out the same.
Cheers.

Title: Re: Series Brake Servo.
Post by: bogie on March 24, 2010, 17:10:01

Hi,ive had this problem many time and to be honest ,get a new servo for £46 and while your at it replace the master with one from a long wheel base(converting to single line) as it has a 1 inch bore in stead of 3/4 giving better brakes and only costs £20 instead of £56 for dual,you will then have good brakes for years.

Title: Re: Series Brake Servo.
Post by: MuddyMike on March 24, 2010, 18:15:13

Do you have vacuum at the pipe leading into the servo?

Mike

Title: Re: Series Brake Servo.
Post by: Bigant45 on March 24, 2010, 18:29:55

Yes i have good vacuum. Forgot to say, Ive just recently fitted 200tdi "sweet"

Title: Re: Series Brake Servo.
Post by: MuddyMike on March 24, 2010, 18:58:59

Then you must have been unlucky with two bad servos, or you have fitted them wrongly!

Mike

Title: Re: Series Brake Servo.
Post by: bogie on March 24, 2010, 20:01:25

You cant really do anything wrong with a fitting a servo apart from having a faulty one.Just bite the bullet n go for a new one.