Mud-club

Vehicle & Technical => Discovery => Topic started by: big tim on May 07, 2008, 19:41:21

Title: 2" lift springs
Post by: big tim on May 07, 2008, 19:41:21

Hi guys had a set of 2" lift springs given to me. I have noticed that there is some difference in height between  the n/s and o/s springs Which side does the taller spring sit n/s or o/s. cheers Tim :?

Title: Re: 2" lift springs
Post by: clbarclay on May 07, 2008, 20:46:02

Typically the longer spring should be the same side as the driver (the heaviest side). Both springs on an axle should be the same rate, though one side can be made longer to level the vehicle when the center of gravity is not exactly in the middle.

Title: Re: 2" lift springs
Post by: Sharpshooter on May 07, 2008, 21:04:31

Quote from: clbarclay on May 07, 2008, 20:46:02

Typically the longer spring should be the same side as the driver (the heaviest side). Both springs on an axle should be the same rate, though one side can be made longer to level the vehicle when the center of gravity is not exactly in the middle.

Yes this is correct. :)

Title: Re: 2" lift springs
Post by: big tim on May 07, 2008, 21:22:14

Thanyou for your help guys :D