Mud-club

Vehicle & Technical => Discovery => Topic started by: mungajeep on April 13, 2007, 22:25:08

Title: Engine
Post by: mungajeep on April 13, 2007, 22:25:08

Hello , Would anyone be able to tell me what the cylinder head torque setting are for a Discovery 1 V8 Carb Model

Thanks[/b]

Title: Engine
Post by: Dr Neil on April 13, 2007, 22:43:10

according to the workshop manual they are as follows:

outer row 54-61nm or 40-45lbft
centre row 88-95nm or 65-70lbft
inner row 88-95nm or 65-70lbft

hope this helps and good luck

Neil.....

Title: Engine
Post by: Range Rover Blues on April 13, 2007, 23:12:42

Either sling the outer row (4) in the bin or torque them to about 25 LB/FT and thread lock them in.  All they do is warp the head and cause the gasket to fail.