Mud-club
Vehicle & Technical => Defender => Topic started by: 90sam on March 31, 2007, 16:20:05
-
Hey all,
have been taking my dashboard apart and need your adivice
I need to get the grey plastic off which is behind the vents, if you get me.
held on by about 7 pin things! I can get the 2 big ones off, but need some advice on how to get the 5 little ones out cause you cant get behind them. Any ideas?? There the little circles on my pictures, hope you get what i mean!
(http://i5.photobucket.com/albums/y155/onzasam/000_2834.jpg)
(http://i5.photobucket.com/albums/y155/onzasam/000_2836.jpg)
(http://i5.photobucket.com/albums/y155/onzasam/000_2835.jpg)
Cheers
Sam
-
Have you tried a trim tool?
-
Nopee i havent, i do not own one well i doubt! where can you get them from? Is there away of doing it without it?
-
I think the middle pushes out of them and then you can just pull them out!
Put a screwdriver in the middle of them and push!
-
I think the middle pushes out of them and then you can just pull them out!
Put a screwdriver in the middle of them and push!
Agreed, if the pic looks like it that little plastic pin should pop through, mind you finding the flaming thing when it does is a different matter
-
i tried to ram it with a screwdriver to no avail! it has to come out by pulling cause i got on out randomly and the head is bigger than the hole so wouldnt go through :?
-
Sorted. :lol: Anyone know how to remove the dash tra\y without disconnectiing loads of wiring and heater ducts?
Samm
-
Yes, but there is an insert in those little plastic things, that is how they were on mine anyhow..
As for removing the dash... i used a big pry bar! :P