Mud-club

Vehicle & Technical => Defender => Topic started by: 90Adam on March 26, 2007, 15:39:19

Title: Side Exit Exhaust
Post by: 90Adam on March 26, 2007, 15:39:19
Hello All,

First post on here although ive been a member a while, i've been lurking in the background.

I want to put a side exit exhaust on my 90 and i was planning on exiting it just in front of the rear wheel on the passenger side, mainly because it looks easier to do.

But, ive been told this could be an MOT failure as the exhaust exit would be too close to the passenger compartment and the short exhaust would also affect the running of the engine and increase the ehaust gas temp.

So it looks like an exit behind the rear wheel but this is more of a pain in the arse and more expensive.

Anybody had this problem or want to give some advice on which is the best option.

Cheers

Adam
Title: Side Exit Exhaust
Post by: paul_humphreys on March 26, 2007, 16:58:09
I know of a lot who have one and pass the mot ok. I know Gwyn Lewis sells one. www.gwynlewis4x4.co.uk

Paul
Title: Side Exit Exhaust
Post by: V8MoneyPit on March 26, 2007, 17:35:28
I have mine exiting ahead of the wheel, but it's a 110. My MOT tester has seen it (he's a Land Rover enthusiast!) and didn't suggest that it will be a problem.
Title: Side Exit Exhaust
Post by: unknownmanxman on March 26, 2007, 18:14:22
I can rate the gywn lewis side exit kit..
Title: Side Exit Exhaust
Post by: Mudmonkey on March 26, 2007, 18:28:36
anyone know how much the gwyn lewis one is? i quite fancy one 8)
Title: Side Exit Exhaust
Post by: Xtremeteam on March 26, 2007, 18:44:04
ive got one on mine & noticed it spools quicker & harder


Pics in my gallery
Title: Side Exit Exhaust
Post by: SteveG on March 26, 2007, 19:15:43
hehe like the new title Mike. Are you sure you are extreme enough to be worthy of this esteemed title though. Also not sure your 90 has enough bolt on shiny bits to qualify :roll:  :roll:

Steve :D
Title: Side Exit Exhaust
Post by: Xtremeteam on March 26, 2007, 19:50:32
Quote from: "SteveG"
hehe like the new title Mike. Are you sure you are extreme enough to be worthy of this esteemed title though. Also not sure your 90 has enough bolt on shiny bits to qualify :roll:  :roll:

Steve :D


I feel its worthy,there is no orange or green tat stuck on mine,each part is strategically picked to work with the rest, to make it as capable as possible,

Please remember this is the 90 that followed the portal bob round all the black routes at WITW that anything the PB tackled i followed,

Evolution isnt a process,its an outcome :wink:
Title: Side Exit Exhaust
Post by: extreme90 on March 26, 2007, 21:29:17
raises EGT  :roll:  errm...thats fueling that does that  :roll:
you wont have any probs with an mot bud there are hundreds the same about and they all passed  :wink:
mike yours is like mine...behind the rear wheel not in front  :wink:
the turbo spools way quicker with it infront.....but its just way too loud  :shock:

dan
Title: Side Exit Exhaust
Post by: Xtremeteam on March 26, 2007, 21:34:23
(http://members.mud-club.com/galleryimages/af75dafa553e229d72438230326dfe11.jpg)

Oh & it sounds the berries on full chat
Title: Side Exit Exhaust
Post by: ian_s on March 26, 2007, 22:17:02
my 200tdi in my series3 88 exits in front of the rear wheel, and that passed an MOT

and yes it is loud, but the turbo spools up soooo fast
Title: Side Exit Exhaust
Post by: 90Adam on March 27, 2007, 11:36:52
Cheers Guys,

Think i will stick to the original plan and put in it front of the rear wheel.

What do you mine by the turbo spooling faster? and what are the problems with this?

Adam
Title: Side Exit Exhaust
Post by: Xtremeteam on March 27, 2007, 18:07:54
Quote from: "90Adam"
Cheers Guys,

Think i will stick to the original plan and put in it front of the rear wheel.

What do you mine by the turbo spooling faster? and what are the problems with this?

Adam

if it spools harder & faster you get the power quicker,the faster you can get the exhaust gases out the faster you can get the turbo spinning,

there aint no problems with this as it all helps in tweaking a TDi
SimplePortal 2.3.5 © 2008-2012, SimplePortal