Mud-club

Vehicle & Technical => Defender => Topic started by: Nobber on January 20, 2007, 18:08:14

Title: anyone in the kent area doing a td - tdi motor swap?
Post by: Nobber on January 20, 2007, 18:08:14

ive been given a 90 200tdi exhaust by mistake and im after a 19j turbo diesel exhaust.
if anyone in the kent area is changing a td motor for a tdi then i have your exhaust and you have mine.
im going to be bringing it back to the guy i got it from on monday to exchange it but if anyone wants it in the mean time and can swap it for their turbo diesel one they can do.


this is what i have
http://www.cats-direct-shop.co.uk/exhaust-...p?recordID=1461
this is what i need,
http://www.cats-direct-shop.co.uk/exhaust-...p?recordID=1460

Title: anyone in the kent area doing a td - tdi motor swap?
Post by: Porny on January 20, 2007, 20:45:36

Why not just fit the 200Tdi system??

Down pipe is the same, centre box is very similar, and the rear box just needs an addtional bracket AFAIK?


Ian

Title: anyone in the kent area doing a td - tdi motor swap?
Post by: Nobber on January 20, 2007, 21:04:56

to much arseing around with it Ian , the rear box goes right across behind the cross member , the down pipe is to long (one big piece), goes over the g'box cross member which has to come out to fit it and wont bolt to the block, all the brackets are different and the tail pipe gets way to close to the back wheel for my liking.
i don't really want to go fitting wrong parts when I'm at this stage of the rebuild, that would be to easy. :lol: