Mud-club

Vehicle & Technical => Discovery => Topic started by: 500bhp on March 08, 2006, 13:21:28

Title: Compression test
Post by: 500bhp on March 08, 2006, 13:21:28

Hi guys, I have just had a reconditioned head fitted to my 2.0 MPI Discovery, and am getting 240 to 250 lbs per sq inch on each cylinder, does anyone know what the correct readings shoud be. The engine is a T16 twin cam as fitted to the Rover 800............Thanks

Title: Compression test
Post by: woody on March 08, 2006, 13:39:36

dont know the compresions
BUT and there always is a but
as long as there is no more than 10 or 15lbs pressure differrence on each cyl then everything should be ok unlless they are all exeptionly low