Mud-club
Vehicle & Technical => Mitsubishi => Topic started by: andygod on June 22, 2008, 11:11:43
-
Could anybody please tell me where I can purchase special tool number MB990954 (lock nut wrench) used for the removal and adjustment of the front hub nut on a 2002 3.0v6 Shogun Sport. This is not a normal hub type nut and does require the special tool. I have tried several places all to no avail, my only option seems to be to try and make one.
-
not sure but if its similar/the same as the toyota hilux ones, my grandad made one out of some steel box section.
other than that ebay? halfords might be able to point you in the right direction.
hope this helps? :smiley:
-
not sure but if its similar/the same as the toyota hilux ones, my grandad made one out of some steel box section.
other than that eBay? halfords might be able to point you in the right direction.
hope this helps? :smiley:
Thanks for the suggestions but I have tried Halfords, Machine mart and several other motor factors and none of them have a clue. I have also tried eBay and can't find any there too. The tool is like a large 1/2 drive socket but instead of having a hexagonal inside its smooth & round inside with two prongs that protrude and fit into the holes in the hub lock nut.
-
The tool is available from Mitsubishi at a cost of around £80 I think. Needless to say they don't sell that many as fortunately it's not really necessary as the tightening can be achieved without it.
However if you feel you must use one join Pajero UK (http://pajerouk.co.uk) as their members have access to hiring one
-
Thanks for the suggestions but I have tried Halfords, Machine mart and several other motor factors and none of them have a clue. I have also tried eBay and can't find any there too. The tool is like a large 1/2 drive socket but instead of having a hexagonal inside its smooth & round inside with two prongs that protrude and fit into the holes in the hub lock nut.
[/quote]
nothing like the hilux one. sorry. sounds expensive :?
-
The tool is available from Mitsubishi at a cost of around £80 I think. Needless to say they don't sell that many as fortunately it's not really necessary as the tightening can be achieved without it.
However if you feel you must use one join Pajero UK (http://pajerouk.co.uk) as their members have access to hiring one
At £80.00 it looks like I'll be having a go at making one, thanks for all of your help and suggestions.
-
its smooth & round inside with two prongs that protrude and fit into the holes in the hub lock nut.
That sounds nasty, like they don't want tanyone t be able to fix the thing. I'd suggest you make one (you could earna few quid hiring it out ;)).