Mud-club
Vehicle & Technical => Military => Topic started by: Guardian. on November 22, 2007, 20:13:40
-
hi all,
ive just bought a nice nato jaw and wide body sankey trailer, thats 24v, so ive gotto change the bulbs and then cut of the military plug and wire on the standard jobbie.
just to save me some time, does anyone know what colour wires goes to what lamp,save me testing every one.
thanks
spence
-
Spence,
if you can wait a couple of days I will ask at work as we have a few :wink: :wink: :wink:
Russ
-
that would be great, im not in a megga rush a i bought a lightboard to get it home, but do want to use the lights fitted on the sankey as they are all them new army ones, and lightboards forever get bust!
thanks
spence.
-
I`m in a couple of meeting tomorrow so will not have time to get to the L.A.D. to borrow thier wiring diagrams, but should be able to do it Monday
Russ
ps. cheers for the rear bumper, :wink:
-
nip into halfrounds and look on the back of there plugs full wiring diagram on them :)
-
nip into halfrounds and look on the back of there plugs full wiring diagram on them :)
I dont think Halfrauds would even know what a 12 pin Military plug would look like, let alone have a diagram for one :wink:
-
lol opps i read that as he was cutting of the military plug and putting on a normal civvy job
-
Colours wont do you any good - you'll need to go off pin letters - all of the cable in the trailer lead will be yellow!
Cant rememeber the pin id's now but might have a link or a picture lying about, I'll be back in a bit..............
-
http://forums.lr4x4.com/index.php?s=ca219e60d6de2d5497a445b977d034de&showtopic=3789
google is your friend ;)
-
OK I knew this was somewhere, just couldn't lay my hands on it though
(http://i241.photobucket.com/albums/ff182/hobbit874/landy/miltrailerlightingsocketwiring.jpg)
This is the VEHICLE socket, not the trailer plug end, but you can back track the pin outs directly to the plug
Remember if it is a 24v trailer, you need to change all light bulbs, including number plate light, dont worry about the convoy light, you wont be wiring it up anyway :wink:
-
thats great, thanks very much, should be able to pinch out the trailer loom what i need and cut off the rest!
thanks again, spence.
-
So there's only one circuit for the tail lights :?
-
Yep, funny layout but works, had to wire up a socket unit on two vehicles, and it worked first time on the original trailer plug, all lights worked on trailer
I have a spare 12 pin socket and was going to make up a converter for the trailer 12pin to standard trailer plug for the disco rather than wire another one into that
Knocked that up while I was playing with mine, could never find it when I wanted it online, sick of black and while line drawings :lol: