Mud-club

Vehicle & Technical => Range Rover => Topic started by: ben_haynes on July 26, 2008, 16:30:47

Title: rear end droop
Post by: ben_haynes on July 26, 2008, 16:30:47

my rangie sits down by around an inch, the front springs are different to the rear springs, make and colour, the yellow ones i fitted to the front, were slightly longer by an inch, i put these on the front as i thought the weight of the engine will make them sit level but it didnt, is it possible i have put them on back to front or do i need to get an inch spacer under the spring seats at the back? or could it be the self leveling unit thing holding the back end down??

please help i need it sorting asap

Title: Re: rear end droop
Post by: Bobtail on July 27, 2008, 10:32:57

I did same thing Ben

You have them on the wrong way round

the longer springs go on the rear

when i changed mine around all was level

hope this helps


Jim

Title: Re: rear end droop
Post by: ben_haynes on July 27, 2008, 12:03:34

cheers jim will try that and see wat happens