Mud-club

Vehicle & Technical => Suzuki => Topic started by: SMason0877 on August 17, 2004, 14:03:05

Title: Front Spots
Post by: SMason0877 on August 17, 2004, 14:03:05

I was wiring in some front spots this weekend on my vitara,  I noticed on connecting the wire to the main beam that it didnt matter what wire i attached it too there was always power there, even if my lights werent on.  Now im assuming the switching some how works by earthing the connection via the switch in the cab?  In which case i assume i need to get some kinda on/off switch wiring into the cab??

Any help appreciated

Title: Front Spots
Post by: Frankie-Boy on August 17, 2004, 14:21:08

This isn't going to help much but on the Vitara I used to own, I also fitted spots and had one heck of a job sorting it out, an electrician friend did it for me in the end, i'll get in touch with him and ask him how he did it.

Title: Front Spots
Post by: SMason0877 on August 17, 2004, 15:05:00

Thanks again.

/me awards Frankie-Boy helpful Mud-Clubber of the Day Award :D

Title: Front Spots
Post by: northern_scooter_scum on August 17, 2004, 19:24:27

ended up using seprate switches for mine a lot easyer and one main switct to flash them all have pic with lites on but just flairs out camera

Title: Front Spots
Post by: SMason0877 on August 18, 2004, 17:11:06

I was thinking about using a seperate switch to operate them.  Might just bite the bullet and pay someone to do it.   :?

Title: Front Spots
Post by: alaric on October 06, 2004, 10:53:31

I had the same problem sorting Emily's spot out on her SJ. At the moment they are controlled by an independant switch in the cab, but legally they should be slaved to the main beam.

I think the problem is that the lamps are switched on the earth side, instead of the live side, so if you pick up off the back of the lamp it will always switch the spots on.

The solution - which I haven't got round to trying yet - is to find the right wire in the wiring loom, as it comes off the switch.

It's certainly the first thing to try, I just haven't tried it yet!

Alaric.

Title: Front Spots
Post by: SMason0877 on October 08, 2004, 12:51:07

Well if you have any luck please let us know.  Havent done much about mine yet as ive been to busy , i kinda begrudge paying to have them done when i could do it myself (withthe correct knowledge of course)

On a side note, you mentioned legally they need to be wired to the main beam, if i do end up putting them on a seperate switch would that fail an mot?

Title: Front Spots
Post by: hobbit on October 08, 2004, 12:53:49

Errr,
just a thought a lot jap vehicles actually use negative feeds, my Lite Ace had that for the horn, permanent live and the horn push/switch ran through a negative feed, made it interesting when wiring in a relay  :?

Kev

Title: Front Spots
Post by: Wanderer on October 10, 2004, 19:49:27

Shouldn't be a problem. Switch the relay with a negative and with a permanent live to the relay then it'll pull the relay which would connect the two negatives carrying the current.
Just got to have lateral thinking :)

Ed

Title: Front Spots
Post by: alaric on October 12, 2004, 22:50:02

Si,

I'm not sure whether the scope of an MOT would include "Let's press this button and see if some illegal lights come on", however, prudence would suggest removal of the fuse for the driving lights for MOT.

The driving lights on my Pajero work properly, but have 100w bulbs in which are not legal for road use, so I obviously have the fuse removed at all times when on the road, so it won't be present for MOT....

That's my story and I'm sticking to it, anyway...

It might be a while 'til I get round to looking at Em's lights though, as she rolled the 'Zuk at the weekend and things like new windscreen and side window will get slightly higher priority than minor wiring irregularities!

Alaric

Alaric.

Title: Front Spots
Post by: SMason0877 on October 14, 2004, 12:00:30

Thanks for the input guys

/me goes away to learn lateral thinking