Mud-club

Vehicle & Technical => Discovery => Topic started by: chaosego on August 17, 2007, 18:37:42

Title: standard hight springs with +2 shocks
Post by: chaosego on August 17, 2007, 18:37:42

i have +2 inch bearmach kit on its as stiff as a series so i am going to put standard hight springs on can i leave the shocks on or will they bottom out all the time cheers glyn.

Title: standard hight springs with +2 shocks
Post by: Range Rover Blues on August 17, 2007, 19:53:51

No, they will be fine (should be, my plus 2" ProComp are fine on the LSE and that sits on the bump stops when I let the wife out). but you may also find the Bearmach will soften nicely after you have used them for a year.

Title: standard hight springs with +2 shocks
Post by: DEANO3528 on August 18, 2007, 09:10:27

Quote from: "Range Rover Blues"

you may also find the Bearmach will soften nicely after you have used them for a year.

I can second that remark as oneof our guys was moaning about his new BM 90 springs, but after a couple of heavy offroad days the ride had changed remarkably.

Title: standard hight springs with +2 shocks
Post by: chaosego on August 19, 2007, 19:23:19

thanks for the info guys something else to ponder over ta glyn