Mud-club
Vehicle & Technical => Discovery => Topic started by: lyndon on April 01, 2007, 12:38:08
-
Gents, due to the fact that I am now about to start a job where I am travelling 50+ miles to work each day, I have to sell my trusty Disco 200tdi.
I don't have a clue what I should be asking for it and so that is why I need your help.
She is a G reg 200 tdi 3 door in blue. Very little rust, 146000 on the clock. She has 4 new 50/50 tyres, has very recently been serviced and had a new cam belt fitted, along with the usual seals and pulleys etc that go with that job. a new thermostat, and loads of other little jobs that really didn't need doing, but I did them anyway. There is loads of reciepts etc and the engine was re built professionally about 25,000 miles ago and I have the paperwork for that. She has also had a new floor in the rear. The exterior is tatty, but hey its a landrover. There are the usual scratches and the paint work is faded. She passed the last MOT without any dramas and the MOT runs until November.
Any idea on how much I should put her up at. At the moment I am think around the £1200 mark give or take a little?.
-
if it was down here it would be around the £900-£1400 depending on condition but i have seen some higher than that so i would think your not far off, it all depends of course if there is anyone that wants to buy it
-
Yes your right. But then thats always the way with selling a car isn't it. The other option I guess is to sell her to a specialist dealer for parts. Just seems a shame as theres is nothing wrong with it.
-
a good bench mark place to look is evil bay, I bought my H reg off ebay, 200tdi, had a very hard life, but had all the essentials repaired already. Strong engine, half decent box, and 10 months test and I paid £700 for it. A mate bought a J plate one which needs lots of welding and he paid £400 for his, it all depends on who is in the market for them, but they certainly sell well on ebay, and with the one you have there I would say about £950 was a good price if you wanted a quick sale.
-
have a look through the SALES section to gauge prices and interest -i know of a H plater with 2" light light bar and all the usual goodies thats just gone for less thana grand!