Mud-club
Vehicle & Technical => Series Land Rovers => Topic started by: Artwigwa on November 18, 2009, 18:00:02
-
Hi all,
Where do I find the Diff Ratio Markings :-.
I need to fit one to the front but have three to chose from :-k I'm assuming the rear on my SWB S3 is 1.4:7
Regards
-
Count the teeth mate!
-
Mark the gear, them mark and rotate the pinion. It should turn about 4 3/4 times for a 4.7:1 (series) diff or about 3 1/2 for a 3.54:1 (90/110, RRC, Disco) diff.
Hope this helps
Rich
-
:dance: Thanks for the tips, will have a look/count to find the correct diff! :D