Mud-club
Vehicle & Technical => Range Rover => Topic started by: figgy on May 17, 2010, 21:44:17
-
i have just change my tyres to235-85 -16 on my 1994 rrc tdi ,at the weekend i changed the speedo drive on the transfer box for the blue gear for 235-85- 16 ,since then i can not get a reading .it has the electric transponder on the transfer box ,is there any way to check this is working
-
Take the speedo drive out of the transfer box, and try the cable in the square, my bet is that it is too big...
I swapped the BW transfer box to an LT230 and found exactly this issue, I used the gear from the BW box in the end, which fits fine, and the speedo isn't THAT far out, and I am on 33" tyres.
TBH, going from 205 to 235 tyres makes not a lot of difference to the speedo, maybe 8% under reading...
-
It makes 10%, which coincidentally is how inacurate many LR speedos seem to be.
The electronic spped signal also goes to the cruise control, air suspension and engine ECU.
-
It makes 10%, which coincidentally is how inacurate many LR speedos seem to be.
The electronic spped signal also goes to the cruise control, air suspension and engine ECU.
I can agree with that as mine read correct according to tom tom using colway c-trax ;)
-
Mine reads 26 when Road Angel and Tomtom say 30 with 255/85/16. oddometer is out by 14.5% too (at least I have improved my mpg now| :dance:)
-
look at the size of the square drive in the speedo drive they are different sizes weather it has cable or tranducer