Mud-club
Vehicle & Technical => Range Rover => Topic started by: Yoshi on October 25, 2007, 23:01:23
-
Whats the easiest way to move the seats forward when the electric switches wont work?
-
Drive into a wall at 45mph! :shock: :lol: :lol: :lol:
-
If the switch doesn't work forewards but does backwards then reverse the polarity to the seat if you can.
Otherwise take 2 jumper wires from the cig lighter or some fused supply and jump the motors directlym they are under the front of each seat.
You can take out the drive cables and spin those but it takes forever and you can't guarantee spinning them both the same amount.
If it's one motor that's given up (rare) then swap the cables to a motor that does work and use that.
-
we had no switches in our's ended up disconecting the cables under the seat and connecting them to a cordless drill cant remember which did what now
-
I have some instructions for cleaning the switches if you want them! Its a fiddly job but I have done it twice now (both times it worked!).
Send me a PM if you want it.
Regards
Mick