Mud-club
Vehicle & Technical => Discovery => Topic started by: mentalmoshio sophs V8i on October 12, 2007, 14:47:11
-
i already have a 2inch spring lift but want another plus 2 to start with what better to do body lift or coil hats moved cant use axle spacers just yet. or this there another method
-
I,m looking forward to the reply's on this one
wizard :twisted:
-
you seem to know it all allready, so why are you asking :P
-
''axle spacers''
Do you mean spring spacers :?:
-
Knowing what your plans seem to be then for your information a friend has a 2" suspension lift and 3" body lift on his bobtail RRC and runs it on 35-10.5 tyres with no obvious arch cutting.
-
why dont you just put some spacers under your seat, or better still sit on a cushion
-
why dont you just put some spacers under your seat, or better still sit on a cushion
:lol:
-
why dont you just put some spacers under your seat, or better still sit on a cushion
:lol:
you guys make me laugh!!!! still cant stop laughing every time i think about it :lol: :lol: :lol: :lol:
-
I can see it already, this is going to be good !!
wizard :twisted:
-
Raise the spring seats by 2"
8)
-
We could lower everything else in the world by 2 inches :D
-
stilts !
-
you put one of these on the drivers seat
(http://www.toysrus.co.uk/Content/Product/products4/41478601_m.jpg)
-
:lol: :lol: :lol: :lol:
-
P3WNED :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
-
Thats super'b jon boy
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :cry:
-
well might help him feel all grown up
"WAAAAAAAH WAAAAAAAAH WAAAAAAAAH!" :lol: :wink:
-
and, i thought. it Was just me who was getting tiered of hiM.
Ahem, grammar and spelling for "effect"...
Stu.
-
lol thats what i thought.
-
Its nice to see the Mud Club members pulling together again
Even if it is just to take the mickey out of someone
:lol:
-
steveo?
(http://members.mud-club.com/galleryimages/439e3be2ea3eabbd32b67f72e6dd00c3.jpg)
is this the exhaust thats on your truck?
-
Its nice to see the Mud Club members pulling together again
Even if it is just to take the mickey out of someone
:lol:
Save your money - let everyone elses tyres down and your motor will seem huge.
:twisted:
-
get yerself a "honey i shrank the kids" ray
and drive around in this
(http://www.hasbro.com/common/images/products/939181c1649a_main400.jpg)
-
Hey come on guys.
No need to take the pee out of someone is there.
We have all had to learn at one time or another.
My advice, i would not bother, i doubt you would get a lot out of it but ultimatly a body lift and spring cups would be best i suppose.
From what i have heard of yourt plans you will need more than 2".
You can do anything you want to your landy, and it is totally possible but bear in mind you are unlickly to be making it any more capable. And possibly a lot less...
-
http://www.mez.co.uk/fitting35s.html
mike
-
firstly it to stop the tyres from hitting the inner arch . dont want to replace bumpstop yet.
-
firstly it to stop the tyres from hitting the inner arch . dont want to replace bumpstop yet.
(http://www.freemyspacegraphics.com/Graphics/Funny_Animations/images/funny_2.gif)
-
Two extended bumpstops for the rear will set you back about £18 including postage.
Maybe this would be the way to go in the short term.
Stu.
-
He should sit on his signature !!!
-
This threads gone mad!!!!
(http://www.freemyspacegraphics.com/Images/Funny_Animations/images/funny_new_11.gif)
:lol:
-
drive onto 4 of these for a instant and spectaclier 7" lift 8)
(http://ecx.images-amazon.com/images/I/31mnxRTtZEL._SS500_.jpg)
-
Fit a flying bridge. it worked for hammond and his cruiser.
-
no am sorry, but these are the babys, as on show underneath mark evans landy
the " extreme ramps " are made from unique extremely rare angle iron which goes through a chemical dip process which makes these ramps truely extreme
theres no bendin these ramps, there far superior to other " cheaper brands "
they come in a choice of extreme powdercoat colour like extreme orange for example
all for the cheap price of 600 quid
lmao
mike ( xtremeteam will get this along with a few others :lol: )
dan
-
YOU LOT ARE FUNNY :lol: :lol: :lol:
-
drive onto 4 of these for a instant and spectaclier 7" lift 8)
(http://ecx.images-amazon.com/images/I/31mnxRTtZEL._SS500_.jpg)
where sells they for 4x4 tyres
-
Try a commercial vehicle specialist - someone must make wider ones.
I do like that side exit exhaust. Was it a one-off custom build or does someone sell them?
-
steveo?
(http://members.mud-club.com/galleryimages/439e3be2ea3eabbd32b67f72e6dd00c3.jpg)
hi matt custom fit jobby id say around 250 quid to make . according to some members on haveing 4 exhuast pipes make u a chav. thats not gonna sit well with thrasher and a few fellow je people is it.
all i say go for it its ur truck at the end of the day plus quads sound great
-
Is that your truck Steveo?
-
Yeah come on!
Is it you discovery steveo4.0v816vtwinturbo10millionbhpquadexhaustwannabechavthatshouldbedrivingaricerocketoracorsa ????
Gav.
-
mentalwhateveryournameis.........yes it may upset some je owners on my comment about yours looking like a chav mobile exhaust but from what i have seen most of thiers look really nice where as urs looks like you have accidently back in to ripspeed in halfords :roll:
-
:lol: :lol: :lol: :lol: if i laugh anymore im gonna end up in a&e :lol: :lol: :lol: :clap:
-
quote
Is it you discovery steveo4.0v816vtwinturbo10millionbhpquadexhaustwannabechavthatshouldbedrivingaricerocketoracorsa ????
Gav.
[/quote]
Is that your truck Steveo?
lol thats all i can say chaps!!
-
Well just brought this baby
Going rip the 300 out and put a v8. :P
UNDERBODY GUARDS,HEADLIGHT GAURDS, 2INCH LIFT, 265/75/16 MACHOS, TUBLAR WINCH BUMPER WITH GS8000 WINCH, CHEQUERPLATE , QUAD 4 INCH EXHUAST, ROOF RACK, ROOF LIGHTS , ANGEL EYE AND BLUE HEADLIGHTS AND FOGS. LOAD BARS, PERFORMANCE ENGINE PARTS, REAR WORK. LIGHT, FREESTYLE ALLOYS WITH 235/85/16 ROAD TYRES, CD PLAYER, DIGITAL TELE , HARD DRIVE MUSIC CENTRE . REAR LADDER.LOADS OF BODY GRAPHICS
SELL IT FOR PEANUTS
-
This is ones of the blokes in the Discovery Owners Club did he put Uni Mog axle's on it thats some hight. Jeff
-
Well just brought this baby
Going rip the 300 out and put a v8. :P
UNDERBODY GUARDS,HEADLIGHT GAURDS, 2INCH LIFT, 265/75/16 MACHOS, TUBLAR WINCH BUMPER WITH GS8000 WINCH, CHEQUERPLATE , QUAD 4 INCH EXHUAST, ROOF RACK, ROOF LIGHTS , ANGEL EYE AND BLUE HEADLIGHTS AND FOGS. LOAD BARS, PERFORMANCE ENGINE PARTS, REAR WORK. LIGHT, FREESTYLE ALLOYS WITH 235/85/16 ROAD TYRES, CD PLAYER, DIGITAL TELE , HARD DRIVE MUSIC CENTRE . REAR LADDER.LOADS OF BODY GRAPHICS
SELL IT FOR PEANUTS
PMSL :joker: ....you forgot the ugly bolt ons :scold: :lol:
-
his typing is worse than mine.
-
steveo?
(http://members.mud-club.com/galleryimages/439e3be2ea3eabbd32b67f72e6dd00c3.jpg)
hi matt custom fit jobby id say around 250 quid to make . according to some members on haveing 4 exhuast pipes make u a chav. thats not gonna sit well with thrasher and a few fellow je people is it.
all i say go for it its ur truck at the end of the day plus quads sound great
You'd have to be talking about quad bikes then cos that's not a quad exhaust now is it? Bungin a halfrauds special on the last 4 inches of 1 pipe does not magically make it 2 all the back down the truck now does it and it wont do a hell of a lot about changing teh sound either - Plus, whats the other silencer looking thing for at the top of the picture, looks like an overly complicated set-up to me and very restrictive with it I'd reckon.....
Oh and to get back on topic, I'm with extended bump-stops as well - with my limited knowledge of suspension geometry, I'd reckon you need them anyway eventually?
-
that just needs some neon lights underneath :doh:
-
in the twin exhaust piccy what it that large stainless cylinder on the rear cross member?
-
Thats what I asked and looking at it again I'm convinced its another silencer - but why is beyond me! :roll:
-
I thought it was a rather odd tubular rear bumper?
-
cant stop laughing :lol: :lol: :lol:
-
steveo?
(http://members.mud-club.com/galleryimages/439e3be2ea3eabbd32b67f72e6dd00c3.jpg)
hi matt custom fit jobby id say around 250 quid to make . according to some members on haveing 4 exhuast pipes make u a chav. thats not gonna sit well with thrasher and a few fellow je people is it.
all i say go for it its ur truck at the end of the day plus quads sound great
You'd have to be talking about quad bikes then cos that's not a quad exhaust now is it? Bungin a halfrauds special on the last 4 inches of 1 pipe does not magically make it 2 all the back down the truck now does it and it wont do a hell of a lot about changing teh sound either - Plus, whats the other silencer looking thing for at the top of the picture, looks like an overly complicated set-up to me and very restrictive with it I'd reckon.....
Oh and to get back on topic, I'm with extended bump-stops as well - with my limited knowledge of suspension geometry, I'd reckon you need them anyway eventually?
I dunno who actually owns this Disco but DAM THATS NASTY. If you are going to put that much effort into a twin exhaust system then get it done properly, not by a quick fit apprentice.
I doubt it will last long once you get it off road.
wizard :twisted:
-
Yes - looking at it again there is one thing puzzling me - why does it cross behind the back axle like that rather than just coming out on the left hand side as per usual? Just seems unneccesary pipework to me!
-
It looks like that thicker pipe on the left of the picture is a 'T' peice with splits the exhaust into 2 a left and right bank which finishes up with the fake twins at either side on those particularly nasty outlet plates.
I'm not knocking the owner of the vehicle, maybe he didn't know the level of workmanship he would end up with but it is quite poor, that T piece would majorly effect the backpressure in a negative way.
I really hope he never paid too much for that, as a decent exhaust manufacturer would have tuned the exhaust for his requirements. That exhaust could feasably be attched to a tdi! Sorry but it gets the :clap: :clap: :clap: :clap: Slow clap award.
Andi
-
Is that your truck Steveo?
HERE MINE..............
the black one isnt mine got it , saw it a while back for sale . its not really my cup of tea but its a crazy set up
-
Is the missus holding it up or is she stuck??
What happens when you go off roading? friend of mine fitted a cherry bomb lost it on the first outing!
-
no problems yet with it . :dance:
besides my money on the ends caps being ripped off
-
in the twin exhaust piccy what it that large stainless cylinder on the rear cross member?
its a rear bumper :angel:
-
Does the pikey bloke have to go everywhere holding the other chav cannon?
Gav.
-
besides my money on the ends caps being ripped off
Still got all of mine - few scratches in them now mind you...
-
help if u know where every point of contact is to. ive found