Mud-club
Vehicle & Technical => Discovery => Topic started by: clover on June 29, 2008, 21:20:25
-
Here is the guide I knocked up on how to fit 300 series 1 leather electric seats into a 200 series 1 shell...
http://www.thewillbys.com/seats.html
Hope its of use to somebody.
-
i do like the look of the ES fronts seat much better than the standard ones just wish they did them in black seats for the rear.
-
Don't think I've ever seen a set of ES seats in black (not full leather anyway). I've seen half leather ones on some of the later models but don't recall if they were electric.
-
them seats look good but on another note how did you get your stero to sit flush ?? :-k
-
ROTL! Should I do a how to with pictures??? :dance:
Darn nuisance isn't it! I was forever catching my knuckles on the radio in my Rangie when I went into low ratio because I coule not get it in any further.
Pinky has got an adapter to convert Land Rover plug to standard rover ISO as the cable from the stereo is ISO (that the PO did a very pi5s poor wiring job on and I can't for the lifr of me work out why or what he was trying to achieve. Some chav no doubt!) So basically I made sure none of the wiring blocks were behind it. Trouble is they now stick out the side like a sore thumb. One of these days I'll get an unmolested Panasonic ISO lead to tidy it up.
-
i recently fitted some half leather recaro buckets from a rover coupe into mine.... very comfy, height adjustment on drivers... so even stumpy SWMBO can drive comfortably!
..took about 4 hrs to figure out the final plan tho, but easy enough once i`d done that!
-
I bet yours were harder to fit than mine! Personally I like the ES seats very much as it makes my Disco very much like driving a RRC which were IMHO one of the most comfortable of all the Range Rovers.
-
Hi my seats had worn out completely I had a pair Saab 9000s fitted having had a Saab for a few years I knew how comfortable they were.And they came for nothing. All the best.
-
SAAB seats are popular mod with the VeeDub guys as the seat bases are very flat and this makes the rails easy to fit to a flat surface. SAAB 900 seats are orthopedic as well and I have to say the GM 900 I had was one of the most comfortable cars to be in I have had as far as seats go.
-
Great guide. :lol:
I have a 300 series. I'm just about to buy a full set of electric seats with switches and loom. Do I simply run a 12v to to switches?
When I did it on my RRC, I gutted the switch box, replaced it with 4 window switches and loads of wire!
-
I should think so providing the switches are not toasted and that you have the center console or some such thing for mounting them
-
(http://smg.photobucket.com/albums/v420/yorkshirecruise/pavarotti/th_Photo-00141.jpg) (http://img.photobucket.com/albums/v420/yorkshirecruise/pavarotti/Photo-00141.jpg)
-
Im in the process of fitting manual ones from a td300 into a 200 my self (was going to use rrc seats as I have two Realy good ones non electric but they sit high (and Im 6ft 6 ) so vision might be a problem still might have a play will post how I get on further, but thoes seats look good m8 thanks for the info helping me lots :D
-
I may have the panels I used up for sale... possibly with seats ...
-
The link in the first post didn't seem to work for me.
Anyhow here is how I fitted RR seats in my disco:
http://www.overland-rovers.com/ralphs-pages/vehicle-modifications/7-fitting-range-rover-seats-in-a-discovery.html
I hope it's of interest.