Mud-club
Vehicle & Technical => Discovery => Topic started by: muddymart on April 27, 2007, 18:54:05
-
How easy is it going to be to change the rear wheel bearings , discs and pads on the disco 300 tdi.
any tips much appreciated.
Martin
-
What experience do you have? Been discussed lots of times if you have a mooch, try the search box :wink:
It's reasonably straightforward, Haynes or workshop manual will walk you through if you're not au fait with the mechanics of it.
Might be worth soaking the hubs/disks with WD40 just in case they're a bit seized onto the hub.
-
Yes if the disks are rusted they can be a PITA to get off the hub and with ABS you can't just cut them in half.