Vehicle & Technical > Discovery

TD5 OIL PUMP BOLT

<< < (4/4)

Gary:
Hi Guys

Make sure you use the correct type Loctite on the bolt. You will need a Loctite  that is resistant to oil contamination. You will also need to replace a couple of gaskets, the sump gasket and a smaller gasket which I can't remember the name of at the mo, sorry.

I'm just about to do this job........ so i will let you know how I get on  :wink:

regards, gary  :)

muddyweb:
Gary,

If you get the chance as you are going along... take some pictures and make a few notes of what you did / any snags, etc.

It would be a really useful thing to add to the Mud-Club members pages.  (Workshop articles)

Gary:
Hi Tim

No problem. That's a very good idea and I would like to help in anyway i can.  :D

Just bare with me cause I'm no natural mechanic and thus I work very slow  :oops:

I will take loads of pics and take notes where necessary.  :wink:

Oh BTW Tim, you probably know I use the D44 site as well, how do I upload images on to this and D44 site from my hard drive?

I don't have a website with pics on yet cause I'm waiting to find a suitable course or suitable book to teach me the basics of web design. This is something that I have been meaning to do for ages.

Kind Regards, Gary  :)

muddyweb:
Hi Gary...

Yeah, I spotted you when you arrived ;-)

Best bet is to use your Mud-Club gallery.  (Click on the 'photos' button at the bottom of your post.)

If you have a look in the 'Questions' topic on the main forum page, I've made a quick post about how to do it :-)

toger:

--- Quote from: "Spooky" ---I know mine's a later car, but maybe I'd better drop the sump and have a look before it gets expensive ... :(
--- End quote ---


So did you do it in the end mate?

Navigation

[0] Message Index

[*] Previous page