Vehicle & Technical > Range Rover

Mixing Diffs

(1/2) > >>

jimbob:
As i think i may have just blown my rear diff. Would i be right in thinking i cant mix 10 spline with 24 spline :?:

Paul:
You can run a 24 spline and 10 spline providing you have matching half shafts.

muddyweb:
And providing they are both the same ratio of course !

If they are both from coil sprung vehicles, then they ought to be though.

jimbob:
I have another complete axle from a 10 spline rangie. So will probly Just swap the whole axle then.

Paul:
Quicker to just swap the diff and half shafts.

Count the teeth on the crown wheel just
to make sure it's the same ratio as the
one your taking out.

Navigation

[0] Message Index

[#] Next page